This section of the My Summer Car guide shows how to prepare complete Satsuma for the first engine start. We tip what actions should be performed in order for the car to be ready for driving and what items will be needed for this.
If you're planning to start the engine of Satsuma, it means that all parts are in their places and all is left to do is to apply the necessary liquids. All necessary containers should be ready after you had bought them at the store.
To begin with, the basis, i.e. applying gasoline. To do this, you should have had an opportunity to take a canister from the garage, carry it to the gas station next to the store, fill it up, and bring it back home. Remember to bring a GASOLINE canister from the garage, not the diesel one, found next to the tractor.
Unscrew the fuel cap of the car, open the canister and hold it in such a way so that the gasoline can flow freely into the tank. You will learn the correct placement thanks to the progress bar at the bottom of the screen.
The locations for the rest of the liquids are placed under the hood. Open it with the HOOD LOCK lever which is found under the dashboard on the left side.
Unscrew all the corks: from the radiator (1) oil (2) and both containers of brake fluid (3).
Fill up the coolant (COOLANT) in radiator number 1.
And brake fluid in both tanks. You will need at least 3 bottles of liquid.
Ready. Screw all the plugs and close the hood. Before starting the engine, be sure to run the throttle (CHOKE) under the dashboard. All is left to do is to turn the key in the IGNITION.