Observation: Reactor - walkthrough, level 2 Observation guide, walkthrough

Last update: 25 June 2020

In this part of the guide to Observation, you will learn how to use the SPHERE device, where can you find and how to activate the FUSION REACTOR, and how to unlock the HATCH SCHEMATIC.

Emma will reboot your system. Re-authorize her voice. She will connect you to the SPHERE - a small mechanical orb that will enable you to freely move through the station. She will give you a short tutorial how to use it. Press W to move forward. Turn the mouse by 180 degrees and return to previous spot. Q and E are used for rotating. Find the item on the table. Hold R and click the left mouse button to check whether the notification system is working.

You can use space bar to return to the station map. The location of the SPHERE will be marked on the map. Go back to the SPHERE by clicking on the CONNECTION SPHERE.

Now, you must activate the reactor located in module EAS-01. Use SPHERE to ride into EAS-10. There you will find a laptop. A depleted battery symbol is blinking on it - it means that the device is disconnected from a power source. The power supply is nearby. Plug into the socket, turn it on. Then, connect to the laptop and read two documents (EF-ALL - WEEKLIES & GYM TIME, EMU SUIT INFORMATION).

In the same room you will also find a device called EMU CALIBRATION UNIT. Connect to it and use SPHERE to move to module EAS-05.

The power will be lost, but Emma will turn it back soon. Connect to the laptop located there and read the message (JR-MM - SPHERE USE CLEARED). In this module, you will also find a device called RMS ARM STATION. Connect to it and you will gain a file named RMS DATA LOG.

Enter EAS-02. On the laptop near the hatch you will find a document with the EAS HATCH SCHEMATIC.

The nearby hatch is blocked (the panel is highlighted in red). You will have to unlock it with a circuit named L3. Press the spacebar to switch to the EAS-02 camera. Hover over the panel, link to it, then press and hold the right mouse button to check which fields should be marked. Hover the mouse over correct fields while holding the left mouse button. Use AWSD keys to mark the diagram. Once you unlock the panel, open the hatch.

Switch back to SPHERE and move to EAS-01. Scan the document hanging on the wall (EXPERIMENTAL FUSION REACTOR) and go to the reactor in the same room (EXPERIMENTAL FUSION REACTOR).

Connect to it, click on ENABLE CONTAINMENT, and then on INJECT PLASMA. You will have 49 seconds to complete this task. Mark the square number 02 with the left mouse button. The W and S keys change the range of magnets energy. Press W or S until the word SAFE appears next to a number. When all of the energy is contained in the circle, click on REDIRECT POWER. The reactor will be launched correctly.

The power will turn on and suddenly turn off. A black hexagon will appear in front of Emma. It will show you three pictures assigned to numbers or letters. Repeat them in the correct order and press enter. If you want the code to be repeated, press R. You will have to repeat the task three times.