Order 14 - Royale Bianco | Car Mechanic Simulator 2018 Walkthrough Car Mechanic Simulator 2018 Guide

In Car Mechanic Simulator 2018's fourteenth task of the story mode, you'll repair a Royale Bianco again. In this section, you will find a description of the actions that need to be performed to complete the order.

• Shopping list
• Walkthrough

Shopping list

Replacement list:

Under the hood:

1. Fuel Rail DI
2. Throttle (I4)
3. Spark Plug x4
4. Ignition Coil x4
5. Piston with Conrod x2
6. Camshaft x2
7. Exhaust Manifold
8. Front Exhaust Section

Suspension and steering:

1. Inner Tie Rod x2
2. Outer Tie Rod x2
3. Front Drive Axle C x2
4. Sway Bar Front End Link A x2
5. Front Sway Bar
6. Steering Rack
7. Front Drive Shaft

Gearbox and clutch:

1. Gearbox (I4)
2. Flywheel
3. Clutch Pressure Plate
4. Clutch Release Bearing

Walkthrough

To remove the pistons, you'll have to take out the oil pan and unscrew the rods from below, then remove them from above.

This order once again relates to Royale Bianco. Unfortunately, the car won't start, forcing you to make do without the suspension diagnostics (although there's quite a bit of work to be done there). This is the first time you'll have to replace engine pistons (first and third from the air filter). To get to them, you'll have to remove the engine head and take out the oil pan (after you drain the oil), then remove the rods.

Once you deal with this problem, as well as several others in the fuel and exhaust systems, go under the car to dismantle the steering and drivetrain, along with the gearbox and the clutch. Other than that, there should be no other problems with the repairs. Many of the pricey components can be fixed at the repair table.