After entering the apartment crouch down in order to be able to move forward. Then approach the crooked shelf, hold the interaction key and move the mouse/stick to the right in order to set the shelf to a vertical position. In the main room of the apartment you will find a body, which you must examine. First, turn on EM Vision and scan two small objects, which are marked in the picture above. Those are: ComPass implant and ID mixer, which makes it difficult to identify its holder. Take the opportunity to check the Stun Baton lying next to the body – scan that one too.
Now switch to Bio Vision and use that mode to scan the entire body (this way you will establish an approximate time of death) and examine the blood stains around the body as well as in other parts of the apartment.
You can now proceed to searching the apartment. While examining the place you can aid yourself by using alternative vision modes or just use the standard one. You should definitely try to open any cabinet and drawer you see, as you can find new interactive items there. The objects that you can scan with EM Vision are: processor, mother board, large cloud server, hologram frame, holo-library, security panel, computer, Chiron ID card lying on the ground as well as data storage unit hidden in the figurine shown in the picture above.
Bio Vision can be used to scan the bottle with the 45F substance from the refrigerator. Besides, there are three syringes with synchrozine in the apartment: on the table in the main room and two in the bathroom.
When you try to leave apartment 007, it turns out that the door is locked. Return to the main part of the room and look behind the panel visible in picture 1. Moving that will reveal a keyboard where you must type a four-digit combination. This is a simple puzzle, because there is a book in the apartment entitled 1984. Therefore, type in the 1984 code.
Now proceed to the computer in the central part of the apartment. When you interact with that one you can read two e-mails and try to intercept documents (that, however, will end with failure). The most important thing is to open the programs tab and select the open gate command (picture 2).