#7 - Gessler: Industrial Espionage | Walkthrough Gunpoint Guide

Last update: 11 May 2016

In this mission you will have to reach the room on the lowest floor, but first you will have to activate a Circuit Box that is protected by an Enforcer.

At first it will be best to get rid of an Enforcer on the first floor. Do that by going into Crosslink Mode and connecting the light switch with a flap, that will open when you press the light switch. Do that when an Enforcer is walking on the flap, and he will lose consciousness the moment he hits the floor. Then use the staircase to get on the first floor.

Now you're very close to the Circuit Box but notice, that the last Enforcer is facing its way. In order to distract him, you need to go in the elevator and ride to the floor above. Attention! When you reach the floor, do not go out of the elevator - that way he will not see you.

Now when you've distracted him you can ride back down and use the staircase to get up. Activate the Circuit Box.

Now go to the light switch just behind the Enforcer. Press it and quickly jump to the ceiling (do not worry, you can stick yourself to the ceiling). The Enforcer will turn around, switch the light back on and will start heading towards the window. Jump down and when he's right next to the window, jump on him and he will fly out the window. On the left side of the room there is also a laptop - pick it up and go back to the first floor.

Now the only entrance to the room below is a flap, so get in the Crosslink Mode and connect it to the camera. Activate the camera by stepping in its line of sight, and then jump down.

Now connect the only light switch in the room with the closed door. Press it in order to open the door and hack the main computer. Now you have to connect the same light switch with the flap above, press it and jump out through the flap.

The only thing left to do is getting out of the building. Connect the camera with the closed exit door, activate it and step outside, and then head to the exit.