Order 27 - Genesis Town | Orders - Second garage Car Mechanic Simulator 2014 Guide

CAR: Genesis Town

TARGETS:

1. Repair Suspension

REWARD: 2000 USD

PARTS:

• Sway Bar End Link Left - 50 USD
• Shock Abs. A Front-Left and Shock Abs. A Front-Right - 150 USD + 150 USD
• Suspension Arm Front-Right - 300 USD
• Shock Absorber Rear - 100 USD
• Suspension Arm Rear-Left A - 500 USD
• Suspension Spring Rear - 150 USD
• Rubber Bushing - 110 USD

Your regular customer has another order for you - this time defects are caused by his wife who trusted the satellite navigation and was guided to damaged bumpy roads. It caused serious harms to the car's suspension - so you have to perform the complex maintenance and repair of that subsystem. The order begin with performing the Diagnostic Path test and then turn on the Show parts conditions mode. You will see many parts that must be immediately replaced:

FRONT OF THE CAR:

• Sway Bar End Link Left
• Shock Abs. A Front-Left and Shock Abs. A Front-Right
• Suspension Arm Front-Right

Image of desolation...

BACK OF THE CAR:

• Shock Absorber Rear
• Suspension Arm Rear-Left A
• Suspension Spring Rear
• Rubber Bushing

As you can see, there is a lot of work for you to do - buy all necessary parts and begin from the front of the car:

Sway Bar End Link Left + Shock Abs. A Front-Left:

1. Twist off and remove Genesis Town Left Wheel.
2. Twist off broken Sway Bar End Link Left.
3. Remove broken Shock Abs. A Front-Left and assemble the new one.
4. Assemble new Sway Bar End Link Left.
5. Screw Genesis Town Left Wheel.

The rubber bushing is often ignored - but very important - part of the car's suspension.

Shock Abs. A Front-Right:

• Twist off and remove Genesis Town Right Wheel.
• Twist off Sway Bar End Link Right.
• Remove broken Shock Abs. A Front-Right and assemble the new one.
• Assemble new Sway Bar End Link Right.
• Screw Genesis Town Right Wheel.

Suspension Arm Front-Right:

1. Use the Car Lifter and go to the view of the front chassis with the Engine - inspect option.
2. Remove Rubber Bushing located in the suspension arm.
3. Remove Suspension Arm Front-Right and assemble the new one.
4. Put Rubber Bushing on it's place.

Now use the Car Lifter go to the back of the car with the Undercarriage - inspect option:

Shock Absorber, Suspension Arm Rear-Left A, Suspension Spring Rear:

1. Remove Shock Absorber Rear located by the right wheel of the car.
2. Remove Suspension Arm Rear-Left A.
3. Remove worn-out Suspension Spring Rear and assemble the new one.
4. Put new Suspension Arm Rear-Left A.
5. Assemble new Shock Absorber Rear.

Removing of the suspension spring is connected also with removing of the suspension arm.

Rubber bushing:

1. Find Wheel Hub located by the left wheel of the car.
2. Remove worn-out Rubber Bushing and assemble the new one.