Order 32 - Castor Earthquake | Car Mechanic Simulator 2018 Story Orders Car Mechanic Simulator 2018 Guide
Last update: 02 July 2019
This story order in Car Mechanic Simulator 2018 requires repairing a Castor Earthquake. Below, you will find information that will help you successfully restore the vehicle to full functionality.
Shopping list
Replacement list:
Engine and brakes:
- Air Filter
- 2x Fuel Rail DI
- Oil Filter (V8)
- Throttle (V8)
- 5x Spark Plug
- 5x Ignition Coil
- 2x Engine Head (V8)
- Brake Servo
- ABS Module
- ABS Pump
- 4x Brake Pads
- 4x Brake Disc
- 4x Brake Disc Ventilated
- 4x Brake Caliper
Transmission and front suspension:
- Gearbox (V8)
- Clutch Pressure Plate
- Clutch Release Bearing
- Starter (V8)
- Transfer Case (4x4)
- Front Drive Axle D
- Front Drive Axle A
- 2x Front Drive Axle A
- Drive Shaft
- Front Drive Shaft B
- Steering Rack
- 2x Inner Tie Rod
- 2x Outer Tie Rod
- 2x Front Steering Knuckle C
Rear suspension:
- 2x Leaf Spring
- 2x Leaf Spring Plate
- 4x Leaf Spring U-Bolt
- 2x Small Rubber Bushing
- Leaf-Spring Rear Drive Axle
- 2x Rear Shock Absorber B
- 2x Rear Axle Knuckle Housing C
- 2x Solid Rear Drive Axle
Walkthrough
The second ignition spark and coil from the right are in good condition and can be put back
No real difficulties here. You have to replace ignition plugs and coils. On the side of the brake servo replace the two middle ones, and on the side of the battery - all but the second from the right (see above). Mind the rear suspension as well: mount the small rubber bushings only on the back of the leaf springs.
See/Add Comments