Guides & Walkthroughs New Guides Popular RPG Action Strategy Adventure YouTube Guides Mobile App
Free iOS App iPhone & Ipad
Download Game Guide PDF, ePUB & iBooks

Car Mechanic Simulator 2018 Game Guide by gamepressure.com

Car Mechanic Simulator 2018 Game Guide

Table of Contents

Order 29 - Mayen M8 | Car Mechanic Simulator 2018 Walkthrough Car Mechanic Simulator 2018 Guide

Last update: Tuesday, July 2, 2019

In this order in Car Mechanic Simulator 2018, you will have to repair an Mayen M8. In the next section, you will find a detailed description of the steps you need to take to complete the task.

Shopping list

Replacement list:

  1. 6x Spark Plug (buy 8)
  2. Alternator
  3. Air Filter
  4. Oil Filter (V8)
  5. Radiator A
  6. Radiator Fan Housing B Fan 1
  7. Radiator Fan Housing B Fan 2
  8. Radiator Fan Housing B
  9. 5x Piston with Conrod
  10. 4x Rod Cap
  11. Engine Block (V8)
  12. Timing Cover (V8)
  13. Crankshaft B (V8)
  14. Water Pump (V8)
  15. Crankshaft Pulley (V8)
  16. Water Pump Pulley
  17. Power Steering Pump (V8)
  18. Oil Pan (V8)
  19. Serpentine Belt A (V8)
  20. Serpentine Belt B (V8)
  21. 2x Timing Belt (V8)
  22. Belt Tensioner
  23. Idler Roller A
  24. 4x Idler Roller B

Exhaust:

  1. 2x Rear Muffler (V8)
  2. 2x Exhaust Pipe
  3. 2x Middle Muffler
  4. 2x Catalytic Converter
  5. 2x Front Exhaust Pipe (V8)
  6. 2x Exhaust Manifold (V8)

Walkthrough

The pistons highlighted in green have to be replaced - Order 29 - Mayen M8 | Car Mechanic Simulator 2018 Walkthrough - Story orders - Car Mechanic Simulator 2018 Game Guide
The pistons highlighted in green have to be replaced

Again, you need to disassemble the whole engine, in order to get to the engine block. Keep track of which pistons have to be replaced: from the side of the brake servo - all but the one in the right corner. On the other side: two pistons in the corners. Ignition plugs should be bought in a set (8 plugs) - replace all, to avoid a mistake (they're cheap - 6$ a plug). This time, you will also have to fit the pistons with new rod caps. Looking from the side of the oil filter, the above picture shows the caps that have to be replaced.

Replace only the A roller thats fitted at the A belt - leave the one at belt B - Order 29 - Mayen M8 | Car Mechanic Simulator 2018 Walkthrough - Story orders - Car Mechanic Simulator 2018 Game Guide
Replace only the A roller that's fitted at the A belt - leave the one at belt B

When assembling the engine, note that there are two A idler rollers, but only one has to be replaced - the one with the serpentine belt A; it'll have to be installed after the belt is in place.

See/Add Comments

You are not permitted to copy any image, text or info from this page.

This site is not associated with and/or endorsed by the PlayWay or Red Dot Games. All logos and images are copyrighted by their respective owners.

Copyright © 2000 - 2022 GRY-Online S.A. for gamepressure.com, unofficial game guides, walkthroughs, secrets, game tips, maps & strategies for top games.