Order 34 - Bolt Reptilia R2 | Car Mechanic Simulator 2018 Walkthrough Car Mechanic Simulator 2018 Guide
Last update: 02 July 2019
The last order you will encounter in Car Mechanic Simulator 2018 requires repairing a Reptilia R2. This section includes a walkthrough of the mission, including a list of spare parts needed, as well as info related to preforming the repairs.
Shopping list
Replacement list:
Engine:
- Radiator A
- Radiator Fan Housing
- Radiator Fan Housing Fan
- Brake Servo
- ABS Pump
- ABS Module
- 2x Fuel Rail DI
- Fuel Pump
- Oil Filter (V8)
- Throttle (V8)
- 8x Ignition Coil
- 8x Spark Plug
- 4x Camshaft (V8)
- 3x Cam Gear
- 2x Timing Belt (V8)
- 4x Piston with Conrod
- 4x Piston Rings
- 4x Rod Cap
- Crankshaft (V8)
- Crankshaft Bearing Cap
- Gearbox (V8)
- Clutch Pressure Plate
- Clutch Release Bearing
- Flywheel
Suspension:
- 2x Solid Rear Drive Axle
- 2x Wheel Hub Cap
- 4x Brake Pads
- Sport Tire (285/45R17)
Chassis:
- Front Bumper
- Front Right Fender
- Right Headlight
- Right Side Mirror
- Right Taillight
- Left Taillight
- Front Left Door Window
- Front Right Door Window
- Front Window
- Trunk Window
Walkthrough
It's the last story mission. You have to rebuild a new V8 and replace all plugs and coils, so there's not much that could go wrong. It's easy to forget about the need to replace the brake pads and the rear drive axle. Also: be careful when buying body parts - there's another car model similar to this one, just a different version (this one is the R2 edition), so it's easy to buy the wrong parts. Remember to read the descriptions carefully.