Order 26 - Rino Piccolo | Car Mechanic Simulator 2018 Walkthrough Car Mechanic Simulator 2018 Guide
Last update: 02 July 2019
In this task, you have to make repairs on a Rino Piccolo. Below, you will find what are the steps that need to be completed during this order in Car Mechanic Simulator 2018.
Shopping list
Replacement list
Engine components:
- Battery
- Air Filter
- Oil Filter (I4)
- Fuel Filter
- Throttle (I4)
- Intake Manifold (I4 DI)
- Oil Pan (I4)
- Radiator Fan Housing
- Radiator Fan Housing Fan
- Ignition Coil x4
- Spark Plug x3
- Serpentine Belt A
- Serpentine Belt B
- Belt Tensioner
- Idler Roller A
- Crankshaft Pulley
- Timing Belt
- Cam Gear
- Starter
- Gearbox (I4)
- Flywheel
- Clutch Pressure Plate
- Clutch Release Bearing
Front Suspension:
- Rubber Bushing x6
- Wheel Hub Cap x2
- Front Shock Absorber Cap x2
- Front Spring x2
- Front Sway Bar
- Steering Rack
- Front Drive Axle C x2
- Front Drive Shaft
Rear Suspension:
- Rear Sway Bar A
- Sway Bar Rear End Link (right side)
- Rear Swing x2
- Rear Shock Absorber Cap x2
- Rear Axle Knuckle Housing A (right side)
Brakes, Wheels, Body:
- Brake Servo
- ABS Pump
- ABS Module
- Brake Pads x4
- Brake Caliper (front left)
- Brake Disc Ventilated (right side)
- Brake Disc x2
- Rim Classic 02, 14' x4
- Tire Standard (175/65R14) x4
- Front Bumper
- Front Left Fender
Walkthrough
Once again, you'll have to replace the rubber bushings hidden in the rear
Rino Piccolo is your next guest - nothing too tricky or time-consuming. Just watch out for the rubber bushings: replace all in the front suspension crossmember but only the two rearmost in the rear.
You'll also have to replace the battery. Once you've upgraded your workshop to level 3 after your last order, the battery can be simply recharged. No need to buy a new one. Just put it in the battery charger and leave it there for a while.
See/Add Comments