Order 18 - Elenti Callope | Car Mechanic Simulator 2018 Walkthrough Car Mechanic Simulator 2018 Guide
Last update: 02 July 2019
This story order in Car Mechanic Simulator 2018 requires you to repair an Elenti Callope. Below is the repair procedure and a list of parts that need to be replaced in the car.
Shopping list
Replacement list:
Suspension and steering:
- Steering Rack
- Front Sway Bar
- Sway Bar Front End Link A x2
- Inner Tie Rod x2
- Outer Tie Rod x2
- Front Suspension Crossmember B
- Rear Drive Axle B x2
- Front Axle Knuckle Cover x2
- Front Steering Knuckle A x2
- Lower Suspension Arm x2
- Rubber Bushing x12
Brakes:
- ABS Pump
- ABS Module
- Brake Disc x2
- Brake Disc Ventilated x2
- Brake Pads x4
- Brake Caliper x4
Other:
- Air Filter
- Air Filter Cover
- Spark Plug x3
- Battery
- Rim Classic 13, 18" x4
- Sport Tire (205/40R18), ET:0 x4
Body:
- Front Bumper
- Front Left Fender
- Front Right Fender
Walkthrough
The next car is Elenti Callope, a substitute for the legendary Renault Clio V6. The first thing that may surprise you is the engine in the back; fortunately, there's little work to be done here. Your main interest is the steering and the brakes.
In this mission, you'll have to watch out for front and rear lower suspension arms. The rubber bushings need to be replaced (two per suspension arm and four extra for the front crossmember). Front lower suspension arms need to be replaced along with bushings; in the rear only the bushings need to be changed. Take note that some of the parts in this car are of different type than usually, such as Rear Drive Axle B. One more thing you haven't done in a while is changing the oil. When dealing with the body, don't forget to add the license plate to the new bumper.
Note - you may encounter a bug in this car, enabling you to add wheels before you install the brakes. In such case, begin with the wheels and then fit in the elements of brakes through the spokes.