Car Mechanic Simulator 2018 Game Guide by gamepressure.com

Car Mechanic Simulator 2018 Game Guide

Table of Contents

Job 7 - Royale Crown | Story orders Car Mechanic Simulator 2018 Guide

A (quite long) list of parts:

Front:

  1. Lower Suspension Arm
  2. Inner Tie Rod x2
  3. Outer Tie Rod x2
  4. Front Axle Knuckle Cover
  5. Front Steering Knuckle A
  6. Steering Rack

Rear:

  1. Rear Suspension Arm
  2. Rear Suspension Arm A
  3. Rear Suspension Arm B
  4. Sway Bar Rear
  5. Rear Shock Absorber A
  6. Rear Sway Bar A
  7. Rear Axle Knuckle Housing A
  8. Wheel Hub 3
  9. Rubber Bushings x3
  10. Small Rubber Bushings x2

Drive and Gearbox:

  1. Front Drive Axle C x2
  2. Front Drive Shaft
  3. Clutch Pressure Plate
  4. Flywheel
  5. Clutch Plate
  6. Gearbox (I4)

Brakes:

  1. Brake Caliper
  2. Brake Pads x4

Cooling System:

  1. Radiator Fan Housing
  2. Radiator Fan
If your task is to remove the gearbox, start by dismantling the starter, as V8 engines have starters accessible from the bottom of the car) - Job 7 - Royale Crown | Story orders - Story orders - Car Mechanic Simulator 2018 Game Guide
If your task is to remove the gearbox, start by dismantling the starter, as V8 engines have starters accessible from the bottom of the car)

This job becomes active once you've reached level 7. Your task is to perform a large set of repairs to braking, suspension, drive, and cooling systems. Use the Test Track and Test Path to receive the list of all shortcomings.

The bushings in the rear axle are often passed over - Job 7 - Royale Crown | Story orders - Story orders - Car Mechanic Simulator 2018 Game Guide
The bushings in the rear axle are often passed over

Dispose of the wheels and remove the braking systems. Approach the front left wheel and dismantle all suspension elements - proceed the same with the rear right wheel. Switch to the front of the vehicle and dismantle the drive axles, the whole gearbox and finally, the clutch. Don't forget about the starter (removable from the engine view when the vehicle is on the ground) which removal is necessary if you want to disassemble the gearbox. Proceed by repairing both the radiator fan and the radiator itself.

Tip: You can easily detect the damaged suspension elements by using the Examine Mode which shows the durability of each element and whether do you need to replace it - if the latter is true, the part will be marked in red.

You are not permitted to copy any image, text or info from this page.

This site is not assotiated with and/or endorsed by the PlayWay or Red Dot Games.
Official Car Mechanic Simulator 2018 Game Guide page at . All logos and images are copyrighted by their respective owners.

Copyright 2000 - 2016 GRY-Online S.A. for gamepressure.com, unofficial game guides, walkthroughs, secrets, game tips, maps & strategies for top games.